Adapter from flange to screw connection 4mm pipe

Flanges for steam model construction for soldering in steam and water pipes. All sizes have 4 x 2.2mm holes for screwing with M2 screws (SW 4mm or SW 3mm). The flanges can be pushed onto a steam or water line and can be brazed or soldered. These flanges make their model building engine look true to the original. The enclosed Abil paper seal ensures the required tightness. Included in the delivery are: 10 flanges 8 Seals     Flansch A Flansch B Durchmesser 16mm 18mm Höhe 5mm 6mm Zum Einlöten von 4mm Rohr 6mm Rohr Teilkreis 11mm 13mm On request, we can supply you with the appropriate screws and nuts M2x6 Modellbauschrauben (SW 3) Modellbaumutter M2.The screws and nuts are not included in the scope of delivery.

Here you will find model construction screws in various diameters and lengths made of brass. A model bucket with a hex head has a smaller key width and a higher head compared to standard hex head screws. With model screws, you can give your steam engine, Stirling engine or Flammenfresser an authentic appearance. Since the screws used at the time of steam engines or station heaters were similar in proportions. In addition, the smaller heads consume less space on your model machine and they can be placed closer. We recommend that you use our Micro plug to mount the model screws. One packaging unit includes 25 model hexagon bolts. The following model screws are available at any time. Model building screw brass SW. 3mm M2x5mm / head height 2 mm Model building screw brass SW. 3mm M2x6mm / head height 2 mm Model building screw brass SW. 3mm M2x10mm / head height 2 mm Model building screw brass SW. 4mm M3x8mm / head height 1.7 mm Model building screw brass SW. 4mm M3x15mm / head height 2,5 mm Price per 25 pieces in EUR.  

The hard copper tube Sf-Cu is suitable for all applications in steam model construction and for technical model construction. In contrast to the soft copper tube, this copper tube is delivered straight in the bar. If you want to install a straight line, we recommend using this copper pipe. It is suitable for steam lines, fuel lines and cooling water pipes. If the copper tube should be bent once you can burn it with the burner before, afterwards it can bend excellent. The copper tube hard can be easily soldered and brazed. For brazing, we recommend our AG-55 silver braze bars. Matching flanges and fittings for model building you here. The CU pipe is supplied as a straight piece 1 Packing unit consists of 3x 330mm long bars. Total length 1000mm The following copper tubes are available: 2mm x 0.3mm round tube 3mm x 0.5mm round tube 4mm x 0.5mm round tube 5mm x 0.5mm round tube 6mm x 0.5mm round tube 8mm x 1mm round tube If you need brass pipes, click here (brass pipe Ms63)

These copper fittings are for soldering steam lines and water pipes and can be brazed with silver solder as well as soft soldered with soft solder. If you want to make steam pipes as straight as possible with the fittings, we recommend the copper pipes which are available from us. In addition, the fitting 90 ° are still suitable for exhaust, cooling lines and other constructions in model construction. The 90 ° bends are formed in one piece from copper tube. The copper fittings are available in different sizes. In the fittings, both the copper tube we supply and the copper tubes can be brazed. You will also find in our shop couplings and tees for pipeline construction in model construction.   The fitting 90 ° bends from 4mm to 6mm have a wall thickness of 0,5mm. The copper arches from 6mm to 12mm have a wall thickness of 1mm                         Fitting 4mm Fitting 5mm Fitting 6mm light Fitting 6mm schwer Fitting 8mm Fitting 10mm Fitting 12mm   Radius Neutrale Faser 5mm 7mm 9mm 9mm 10mm 13mm 15mm     Schenkellänge 13mm 16mm 19mm 19mm 24mm 26mm 32mm     Zum Einlöten von 4mm Rohr 5mm Rohr 6mm Rohr 6mm Rohr 8mm Rohr 10mm Rohr 12mm Rohr     Wandstärke 0,5mm 0,5mm 0,5mm 1,0mm 1,0mm 1,0mm 1,0mm