This mechanical edge tester is a simple but effective tool for the "ancratch" on the milling machine. If you are looking for the zero point on a workpiece, clamp the edge probe into the drill chuck or the chuck of the milling cutter. Then turn on the router. The speed is not important for this type of corner switch, you can always stay at the speed that is currently set. Now, carefully approach the workpiece, as soon as the ball bearing stops, you are 5mm (diameter ball bearing 10mm: 2 = 5mm) before the zero point of your workpiece.
The edge selector is only used to zero the X and Y axes to zero the Z axis. The shaft is hardened and should be damaged after a collision times the ball bearing, you will find in our shop also replacement.
Dimensions of mechanical edge switch:
Shaft diameter: 6mm
Length: 80mm
Diameter of bearing: 10mm
These Hss Center Drills are ground, ground and spiral-grooved. The centering drills offered by Bengs Modellbau have industrial quality and are suitable for almost all materials used in model making. You can machine brass, copper, steel, stainless steel aluminum and cast steel round bars with these centering drills in your lathe. The diameters 1mm and 1.6mm are particularly suitable for filigree applications in model construction.
Maximum roundness accuracy
industrial quality
The following center drills are available:
Zentrierbohrer 1mm
Zentrierbohrer 1,6mm
Zentrierbohrer 2mm
Zentrierbohrer 2,5mm
Zentrierbohrer 3,15mm
Machine reamers for the production of dimensionally accurate bores. By rubbing with a reamer, not only good shape and dimensional accuracy, but also good surface quality is achieved. This is of crucial importance when manufacturing sliding bearings in mechanical engineering and model building. The long cutting edges of the reamer have a left-hand twist, which causes the resulting chips to be discharged downwards when rubbing. Thus, a scratching of the bore surface by the resulting chips is avoided. Our machine reamers have industrial quality and can be used to grind drillings in steel, brass, copper, cast iron, aluminum and stainless steel. Please always use enough cutting oil when rubbing, which considerably increases the service life of the reamer. In model construction, these reamers are suitable for producing piston rod guides for steam engines, Stirling engines and flame eaters. The reamers are also ideal for producing bearing blocks with plain bearings or for producing cylinders with a very clean surface. If you produce the axis bore with a reamer for flywheels, the flywheel runs particularly round. Provided you have the flywheel without impact in the lathe.
The machine reamers can be used both on a lathing machine and in a column drilling machine.
With long cutting edges and link spiral
Maximum roundness accuracy
industrial quality
These reamers are available:
Reamer 1H7 / Shaft 1mm / cutting length 16mm
Reamer 1,5H7 / Shaft 2mm / cutting length 21mm
Reamer 2H7 / Shaft 2mm / cutting length 26mm
Reamer 3H7 / Shaft 3mm / cutting length 29mm
Reamer 4H7 / Shaft 4mm / cutting length 46mm
Reamer 5H7 / Shaft 5mm / cutting length 57mm
Reamer 6H7 / Shaft 6mm / cutting length 56mm
Reamer 7H7 / Shaft 8mm / cutting length 71mm
Reamer 8H7 / Shaft 8mm / cutting length 80mm
Reamer 10H7 / Shaft 10mm / cutting length 91mm
Reamer 12H7 / Shaft 10mm / cutting length 110mm
Reamer 14H7 / Shaft 14mm / cutting length 112mm
Reamer 15H7 / Shaft 14mm / cutting length 114mm
Reamer 16H7 / Shaft 14mm / cutting length 123mm
Reamer 18H7 / Shaft 14mm / cutting length 135mm
Reamer 20H7 / Shaft 16mm / cutting length 145mm
Reamer 25H7 / Shaft MK3 / cutting length 174mm
Reamer 26H7 / Shaft MK3 / cutting length 178mm
This twist drill set consists of 49 profile-ground drill bits. The twist drills have a particularly high concentricity and pitch accuracy, as well as a precise tip grind. You can recognize profile-ground drills by their bare surface. The drill set is delivered and stored in a practical metal box. Thanks to the precise tip grinding, the drills do not run and drill round, dimensionally accurate holes. The twist drill set is not a hardware store product but rather industrial quality. Thanks to the 0.1mm gradation of the drills, you always have the right drill at hand, regardless of whether you want to make threaded holes, an undersized hole for a reamer or an oversized hole for a shaft bushing with a clearance fit.
Industrial quality (not hardware store goods)
You have two different drill boxes to choose from:
Twist drill set from 1mm - 5.9mm drill bits 49 pieces
Twist drill set of 6mm - 10mm drill bits 40 pieces
Replacement Twist drill to fill the drill boxes can be found here.
The conical countersinks with 3 cutting edges are sanded radially and the chip spaces are ground from the solid. The conical sinker is suitable for producing 90 ° countersinks. You can sink DIN 7991 countersunk screws here. The conical sinker is universally applicable for both steel and stainless steel as well as for non-ferrous metals such as brass and aluminum. The 90 ° counterbores have industry quality and should ideally be used in a stator drilling machine. Of course, you can also use the conical sinker with a hand drill or a cordless screwdriver. We can supply you with conical sinkers in particularly small diameters, which are very suitable for working in the field of technical modeling.
Countersink 90°
Maximum roundness accuracy
3 cutting
industrial quality
Cutter diameter:
2mm
|
Cutter length:
Cutter short
Hss Milling cutter with 3 cutting edges. The face cutting geometry is suitable for dipping. Universal cutting geometry for universal use on your milling machine. The Hss cutters can be used as a long hole and end mill. Ideal for use in model making but also in industry and crafts. Suitable for all materials very good for brass, steel, stainless steel and aluminum. The milling cutters have industrial quality and are not a hardware for the building market. We have been using these milling cutters for many years in our production and on our CNC milling machines.
The Hss Milling cutter are also suitable for use on the lathe. You can clamp the cutter in the drill chuck of the tailstock and then make cylindrical holes with these cutters. For example for stuffing boxes for steam engines.
You have the choice between router short and router long. You can make the selection at the top of the selection menu. The dimensions can be found in the table below.
Milling cutter short
Diameter
cutting length
overall length
Shaft Diameter
1mm
3mm
34mm
6mm
1,5mm
3mm
34mm
6mm
2mm
4mm
35mm
6mm
2,5mm
5mm
36mm
6mm
3mm
5mm
36mm
6mm
4mm
7mm
38mm
6mm
5mm
8mm
39mm
6mm
6mm
8mm
39mm
6mm
8mm
11mm
43mm
8mm
10mm
13mm
50mm
10mm
Milling cutter long
Diameter
cutting length
overall length
Shaft diameter
2mm
7mm
38mm
6mm
2,5mm
8mm
39mm
6mm
3mm
8mm
39mm
6mm
4mm
11mm
42mm
6mm
5mm
13mm
44mm
6mm
6mm
13mm
44mm
6mm
8mm
19mm
51mm
8mm
10mm
22mm
59mm
10mm
Metal cassette with 7 HSS countersinks. The 4-edged flat cores have a fixed guide pin that guides the counterbore in the bore. The 180 ° countersinks are suitable for the production of countersinks in through holes for cylinder screws DIN912 from M3 to M12. The flat shields are delivered in a metal cassette. In order to produce a cylindrical depression, one proceeds as follows. First of all, a drill is produced with a spiral drill, which is 0.1 mm larger than the diameter of the spindle core. Subsequently, the cylindrical countersink is produced with the appropriate countersink while being guided through the bore.
Schrauben
Senker-Durchmesser
Zapfen-Durchmesser
M3
6mm
3,3mm
M4
8mm
4,5mm
M5
10mm
5,5mm
M6
11mm
6,6mm
M8
15mm
9mm
M10
18mm
11mm
3 Cutting Solid carbide cutter for even higher cutting speeds. Face cutting geometry of the solid carbide cutter is suitable for dipping. Universal cutting geometry. The solid carbide end mills can be used as a long hole and end mill. Suitable for all materials. Ideal for use in model building. Very good for steel, tool steel, stainless steel, and gray cast iron.
If a solid carbide cutter breaks, do not throw it away. You can also use the Kaindl grinding technique to grind a robust and durable spike or turning steel.
industrial quality
Solid carbide milling cutter
Durchmesser
Schneidenlänge
Gesamtlänge
Schaftdurchmesser
1mm
3mm
34mm
3mm
1,5mm
3mm
34mm
6mm
2mm
4mm
35mm
6mm
2,5mm
5mm
36mm
6mm
3mm
5mm
36mm
6mm
4mm
7mm
38mm
6mm
5mm
8mm
39mm
6mm
6mm
8mm
39mm
6mm
8mm
11mm
43mm
8mm
10mm
13mm
50mm
10mm
Machine reamer with 0.03mm undersize. The reamers are ideal for the production of press fits. For example, if you want to produce a crankshaft for a Stirling engine, rub the crankshafts with a 0.03mm reamer smaller than the steel to be pressed. Then you can press the silver steel tightly. The reamer quality is, of course, the same as the standard reamers.
With long cutting edges and link spiral
Maximum roundness accuracy
industrial quality
Available Reamers with 0.03 undersize are the following diameters:
1,97mm H7 Reibahle / Schaftdurchmesser 2mm / Schneidenlänge 26mm
2,97mm H7 Reibahle / Schaftdurchmesser 3mm / Schneidenlänge 29mm
3,97mm H7 Reibahle / Schaftdurchmesser 4mm / Schneidenlänge 46mm
4,97mm H7 Reibahle / Schaftdurchmesser 5mm / Schneidenlänge 57mm
5,97mm H7 Reibahle / Schaftdurchmesser 6mm / Schneidenlänge 56mm
7,97mm H7 Reibahle / Schaftdurchmesser 8mm / Schneidenlänge 80mm
9,97mm H7 Reibahle / Schaftdurchmesser 10mm / Schneidenlänge 91mm
11,97mm H7 Reibahle / Schaftdurchmesser 10mm / Schneidenlänge 110mm
Sie finden hier profilgeschliffene Bohrer aus HSS Stahl. Diese Spiralbohrer haben eine metallisch silberne Farbe, die dadurch entsteht das die Bohrer nicht wie bei den schwarzen rollgewalzten Bohrer nur gewalzt werden sondern aufwendig aus dem vollen gefrästen und geschliffen werden. In der Industrie und im Handwerk werden ausschließlich profil geschliffene Bohrer aus HSS Stahl verwendet.
Profil geschliffene Spiralbohrer sind zwar in der Herstellung etwas teurer den schwarzen rollgewalzten Bohrer in Sachen Präzision und Standzeit weit überlegen. Bei den von uns angebotenen Spiralbohrer ist die Querschneide ausgeschliffen, der Spitzenanschliff trägt sehr viel einen guten Bohrleistung bei. Die Hss Spiralbohrer können in Ständerbohrmaschinen, Handbohrmaschinen, Akkubohrern, Drehmaschinen und Fräsen eingesetzt werden. Bei diesen Bohren handelt es sich um Industriequalität es ist Keine Baumarktware!
Spiralbohrer Sätze mit Metallkassette finden Sie hier.
Profilgeschliffene Bohrer aus HSS Stahl
Preis pro Stück.
Bitte Wählen Sie oben die gewünschte Größe aus aus.