Displacement oiler for model steam

The soft copper tube is suitable for all applications in steam model making and for technical model making. The Cu pipe is also suitable for gasoline lines or diesel lines for motorcycles, tractors and vintage cars. The copper tube is very malleable and can be easily bent into narrow radii by hand. Our soft copper pipes are delivered in a ring and are 1000mm long. If you need a 3m long copper pipe in one piece, simply order 3m copper pipe in the desired diameter. In order to keep your waste as low as possible, we always deliver the pipes in one piece in the length you ordered. Matching compression fittings can also be found in our shop. If you order several meters of a CU pipe diameter, we will always send you the copper pipe in one piece. The following CU tubes and copper tubes in a ring are available: 3mm x 0.5mm soft copper tube 4mm x 0.5mm soft copper tube 5mm x 0.5mm soft copper tube 6mm x 0.5mm soft copper tube 6mm x 1.0mm soft copper tube 8mm x 1.0mm soft copper tube 10mm x 1.0mm soft copper tube

The hard copper tube Sf-Cu is suitable for all applications in steam model construction and for technical model construction. In contrast to the soft copper tube, this copper tube is delivered straight in the bar. If you want to install a straight line, we recommend using this copper pipe. It is suitable for steam lines, fuel lines and cooling water pipes. If the copper tube should be bent once you can burn it with the burner before, afterwards it can bend excellent. The copper tube hard can be easily soldered and brazed. For brazing, we recommend our AG-55 silver braze bars. Matching flanges and fittings for model building you here. The CU pipe is supplied as a straight piece 1 Packing unit consists of 3x 330mm long bars. Total length 1000mm The following copper tubes are available: 2mm x 0.3mm round tube 3mm x 0.5mm round tube 4mm x 0.5mm round tube 5mm x 0.5mm round tube 6mm x 0.5mm round tube 8mm x 1mm round tube If you need brass pipes, click here (brass pipe Ms63)

These copper fittings are for soldering steam lines and water pipes and can be brazed with silver solder as well as soft soldered with soft solder. If you want to make steam pipes as straight as possible with the fittings, we recommend the copper pipes which are available from us. In addition, the fitting 90 ° are still suitable for exhaust, cooling lines and other constructions in model construction. The 90 ° bends are formed in one piece from copper tube. The copper fittings are available in different sizes. In the fittings, both the copper tube we supply and the copper tubes can be brazed. You will also find in our shop couplings and tees for pipeline construction in model construction.   The fitting 90 ° bends from 4mm to 6mm have a wall thickness of 0,5mm. The copper arches from 6mm to 12mm have a wall thickness of 1mm                         Fitting 4mm Fitting 5mm Fitting 6mm light Fitting 6mm schwer Fitting 8mm Fitting 10mm Fitting 12mm   Radius Neutrale Faser 5mm 7mm 9mm 9mm 10mm 13mm 15mm     Schenkellänge 13mm 16mm 19mm 19mm 24mm 26mm 32mm     Zum Einlöten von 4mm Rohr 5mm Rohr 6mm Rohr 6mm Rohr 8mm Rohr 10mm Rohr 12mm Rohr     Wandstärke 0,5mm 0,5mm 0,5mm 1,0mm 1,0mm 1,0mm 1,0mm                      

With this single screw connection you can easily create an easily detachable connection between steam pipes and water pipes. Ideal for steam model building. We have the single screw connection in different sizes for connecting 3mm, 4mm, 5mm or 6mm pipe. The pipe is firmly soldered into one side of the screw connection. The second pipe to be connected is soldered into the soldering nipple. Using the union nut, it can now easily be screwed to the main part. This creates an easily detachable and tight connection between steam pipes, water pipes or fuel pipes. The single screw connections are made entirely of brass and seal with a cone. The model making screw connection is suitable for soldering in copper pipes as well as for soldering in copper pipes. self" href= "https://www.bengs-modellbau.com/brass-pipe-Ms58/5164">Brass tube. suitable & nbsp; Intötnippel  and Cap nuts  You can also find spare parts in our online shop. Scope of delivery: Screw connection with union nut and conical soldering nipple Dimensions of single screw connection for 3mm pipe: Length with nipple: 18mm Wrench size: 7mm Length without nipple: 14mm   Dimensions of single screw connection for 4mm pipe: Length with nipple: 21mm Wrench size: 8mm Length without nipple: 14mm Dimensions of single screw connection for 5mm pipe: Length with nipple: 24mm Wrench size: 9mm Length without nipple: 16mm  Dimensions of single screw connection for 6mm pipe: Length with nipple: 27mm Wrench size: 10mm Length without nipple: 19mm