Finger engine "Empire" Material kit

The finger engine Empire has been specially designed by us so that the material kit can be worked, assembled and painted in less than 6 hours. Therefore, the pedal machine is very good if you want to give a close relative, a good friend or a good model builder a model you have built. Of course, the "Empire" can also build for themselves.

The "Empire" finger engine is a great model for the desk of every technology fan. By moving a finger up and down, we press the pedal and bring the machine to life. The machine is held in motion by actuating the drive pedal. The constant actuation of the finger pedal has a very calming effect on the user. In addition, we recommend using the pedal machine during long telephone conversations to increase the well-being (guess of the designer).

The finger engine is held in the Art Deco style of the 1920s. The finger engine is mounted on a Jatoba base plate The skin wave is ball bearing. Most components of the Empire are made of brass. The flywheel is made of cast steel.

Scope of delivery finger engine "Empire" Material kit

• Machined wooden base plate
• Finished milled parts
• Raw material for the turned parts
• Very clean 80mm cast flywheel
• All required screws, ball bearings and maggot screws
• Planter pedal machine "Empire" Drawings (3 sheets) and construction manual (1 sheet)

Dimensions Pedal machine "Empire" Material set

• Height with base plate: 130mm
• Width with base plate: 135mm
• Flywheel D .: 80mm

Only a few tools are required to build the "Emipre" foot pedal. A small turning machine and a small drill are perfectly adequate. In addition, a gas burner should be provided for softening large parts. M3 and M4 taps and M3 and M4 cutters are also needed. Furthermore, reamers 4H7, 5H7, 6H7 and 10H7, file and a drill set are necessary.