Honing device

Bengs Modellbau

€14.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Size

Set Ersatz Schleifsteine Typ A

Set Ersatz Schleifsteine Typ B

Typ A klein

Typ B mittel

Typ C groß

Typ D groß

Product number: 34811

Product information "Honing device"

A detailed description is enclosed.

The honing device consists of a bolt that is clamped into a drill chuck, two spring flat steels and two movably mounted grinding stones. The grinding stones are pressed evenly by the spring flat steels. The honing device can be clamped into a hand drill or used on a lathe. If the grinding stones of the honing device are worn out, you can of course get a replacement from us.

Material reduction 0.01mm to 0.02mm

We have been using the honing device in our workshop for years to hone cylinder bores on our flame eaters.

Type	Whetstones	Bore diameter
Type A small	2 pieces	12.7mm - 38.0mm
Type B medium	2 pieces	17.5mm - 50mm
Type C large	3 pieces	35mm - 80mm
Type D large	3 pieces	60mm - 90mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Honing device

This honing device is an ideal tool for model makers for honing bores. With the honing device you can significantly improve the surface quality of cylinder bores, for example. The small honing devices are suitable for producing cylinder bores for Stirling engines, steam engines or flame eaters. When working with the honing device, you should always use plenty of cutting oil. A detailed description is enclosed. The honing device consists of a bolt that is clamped into a drill chuck, two spring flat steels and two movably mounted grinding stones. The grinding stones are pressed evenly by the spring flat steels. The honing device can be clamped into a hand drill or used on a lathe. If the grinding stones of the honing device are worn out, you can of course get a replacement from us. Material reduction 0.01mm to 0.02mm We have been using the honing device in our workshop for years to hone cylinder bores on our flame eaters. Type Whetstones Bore diameter Type A small 2 pieces 12.7mm - 38.0mm Type B medium 2 pieces 17.5mm - 50mm Type C large 3 pieces 35mm - 80mm Type D large 3 pieces 60mm - 90mm

Variants from €14.50*

€25.50*

Silberlotpaste ist eine Kombination aus Silberlot und Flussmittel

Soldering paste

Ready-to-use and dosing silver solder paste, 56% silver content (L-Ag55) with the working temperature 650 ° C. The silver solder paste is suitable for fine brazing. The hard solder paste is suitable for creating almost invisible soldering seams, even in inaccessible places. With our silver soldering paste, there are virtually no solder residues at the soldering point, which must be labored. No flux required. Dried silver soldering paste is made ready for use again with a few drops of water. Mix thoroughly before removing. Typical application examples for the silver soldering paste are: Apparatus and equipment for the food industry silver contacts Bronze and brass fittings Modelling piping Heat and cooling technology Fashion Jewelry glasses manufacturing Precision Engineering !!! The silver soldering paste is also suitable for kiln soldering (furnace should have a working temperature of at least 680 ° C) !!! Contents 10 g Here you will find a tutorial on how to braze with silver solder paste.

Content: 10 Gramm (€181.00* / 100 Gramm)

€18.10*

Schneidöl in kleinen Gebinden für den Modellbau

Cutting oil

For all machining processes that place high demands on a cutting and cooling lubricant. Particularly suitable for thread cutting, reaming, sawing, drilling, turning, scraping, punching and milling. Can be used for all types of steel, cast iron and stainless steel. Our cutting oil is also suitable for all non-ferrous metals, copper, brass, aluminum and their alloys. Using cutting oil significantly increases tool life. The cutting oil is chlorine-free and age-resistant. Content: 100ml

Content: 0.1 Liter (€59.00* / 1 Liter)

€5.90*

High temperature soft solder

High temperature soft solder with a melting point of 250 ° C is suitable for fittings, pipelines and components on steam engines, Stirling engines and flame eaters. The soft solder is filled with a flux that burns without residue when flame brazing (flux residues must be removed in the case of piston soldering !!!). If you need additional flux, you can use normal soft solder flux. Due to the increased melting point of 250 °, it is a good alternative to brazing. However, the high-temperature softening braze can not replace brazing. This product should not be used in the vicinity of the boiler. The use of silver solder is recommended. Wire diameter: 1mm Wire length: 1000mm This product is unleashed !!!

€2.40*