O-ring NBR

O-Ringe für vielseitige Anwendungen als Runddichtringe

€3.50*

Available, delivery time: 1-3 days

Product number: 4017

Product information "O-ring NBR"

Round sealing ring made of NBR rubber 70 Shore. The O-ring is temperature resistant from -25 to +120 degrees. Resistant to steam, oil, grease, gasoline, many acids and alkalis High abrasion and stability, cold-flexed metric. With us you will find particularly small dimensions especially for model construction. Whether steam engines, Stirling engines or flame emitters O-ring seals are used in most models.

A packaging unit contains 10 O-rings

The following O-rings are in stock:

Inside diameter 2mm Thread thickness 1mm
Inside diameter 3mm Thread thickness 1mm
Internal diameter 4mm Thread thickness 1mm
Inside diameter 5mm Thread thickness 1mm
Internal diameter 6mm Thread thickness 1mm
Inner diameter 7mm Thread thickness 1mm
Inside diameter 8mm thread thickness 1mm
Inside diameter 10mm Thread thickness 1mm
Inner diameter 26mm Thread thickness 1mm

Internal diameter 2mm Thread thickness 2mm
Inside diameter 3mm Thread thickness 2mm
Internal diameter 4mm Thread thickness 2mm
Inside diameter 5mm Thread thickness 2mm
Internal diameter 6mm Thread thickness 2mm
Inside diameter 7mm Thread thickness 2mm
Inside diameter 8mm Thread thickness 2mm
Inner diameter 10mm Thread thickness 2mm
Inside diameter 16mm Thread thickness 2mm
Inside diameter 17mm Thread thickness 2mm
Inside diameter 25mm Thread thickness 2mm
Inside diameter 29mm Thread thickness 2mm
Internal diameter 44mm Thread thickness 2mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Grafi-Sil Ventilkugeln eignen sich für viele Anwendungen im Modellbau

Grafi-sil valve balls

Grafi-sil valve balls are made of a special silicone rubber. The valve balls ensure 100% tightness in steam model construction with their check valves, feed water pumps and injectors, even when the ball sockets are removed or dirty. They can be used in steam, water and oil pipes and are absolutely noise-free. The following valve ball diameters are available: 4mm Grafi-sil valve balls 5mm Grafi-sil valve balls 6mm Grafi-sil valve balls 8mm Grafi-sil valve balls 10mm Grafi-sil valve balls 12.7mm Grafi-sil valve balls 15,2mm Grafi-sil valve balls You can of course also retrofit the Grafi-sil balls into your existing components. The maximum ball diameter must always be selected. Sufficient is already 0.3mm distance between ball and armature diameter. The graphi-sil spheres can be used up to a temperature of 400 ° C. We use the Grafi-sil spheres, among other things, as outlet valve balls for our flame eaters. We offer you a sample set with 2 balls of each size - with a price advantage of 20% !!! 2x4mm / 2x5mm / 2x6mm / 2x8mm Whoever has used Grafi-sil balls does not take anything else! !!! Grafi-sil valve balls are also used in machine and plant construction !!!

Variants from €2.60*

€2.80*

High temperature soft solder

High temperature soft solder with a melting point of 250 ° C is suitable for fittings, pipelines and components on steam engines, Stirling engines and flame eaters. The soft solder is filled with a flux that burns without residue when flame brazing (flux residues must be removed in the case of piston soldering !!!). If you need additional flux, you can use normal soft solder flux. Due to the increased melting point of 250 °, it is a good alternative to brazing. However, the high-temperature softening braze can not replace brazing. This product should not be used in the vicinity of the boiler. The use of silver solder is recommended. Wire diameter: 1mm Wire length: 1000mm This product is unleashed !!!

€2.40*

Verzinnungspaste zum verzinnen von größeren Bauteilen

Soft soldering paste

Soft soldering paste for brass, copper, steel and silver steel. The paste is applied thinly to the parts to be tinned and heated with a brazing lamp. For large-area soft soldering, it is optimal to tin- the parts beforehand. For example, we use the paste to pre-tine the cylinder and the mirror when constructing a model steam engine. The tinning paste can also be used optimally as a flux substitute. The soft soldering paste is excellently suitable as corrosion protection for steel parts. Bengs Modellbau uses the zinc paste for steel cylinders with a cooling water jacket. For example in the Flammenfresser Kurfürst. Stirring the paste before use is not necessary! The soft soldering paste may be diluted with water. Ready-to-use metal paste Contents: 50g Bottle with brush Click here for the modeling magazine: Soldering with soft solder paste and tin paste Soldering and tinning with soft soldering and tinning paste

Content: 0.1 Kilogramm (€102.00* / 1 Kilogramm)

€10.20*

Gewindestangen für den Modellbau in verschiedenen Durchmessern

Threaded rod DIN 975

The threaded rods are available in brass Ms58 or stainless steel A2 in the diameters M2, M3, M4, M5 and M6. They can be used either as stud bolts, adjusting spindle drive shaft or as screwdrivers. A packing unit contains 2 threaded rods 250mm long. Threaded rod DIN 975 / brass M2 Threaded rod DIN 975 / brass M3 Threaded rod DIN 975 / brass M4 Threaded rod DIN 975 / brass M5 Threaded rod DIN 975 / brass M6 Threaded rod DIN 975 / stainless steel M2 Threaded rod DIN 975 / stainless steel M3 Threaded rod DIN 975 / stainless steel M4 Threaded rod DIN 975 / stainless steel M5 Threaded rod DIN 975 / stainless steel M6

€3.40*