Oil cup

Bengs Modellbau

Durch die Öffnung des Ölerbechers wird Öl einfach nachgefüllt

Die Ölbecher giebt es in verschiedenen Größen

€5.50*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Diameter

4,5mm

6mm

8mm

10mm

12mm

Product number: 11412

Product information "Oil cup"

Oil cup made of brass with M3 or M4 connection thread. For screwing into steam engines, flame eaters and Stirling engines. The oil cups are ideal for technical modeling. The oil quantity is not adjustable on these oilers. The through hole is 1.2 mm in diameter. The speed of the flow depends on the viscosity of the oil. The Olerbecher can be filled with different oils.

Dimensions of the oil cup:

Connection thread: M3 / M4
Overall Height: 23mm
Height screwed: 19mm
Diameter: 12mm

Oelerbecher-modellbau-m3-klein2

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Oil cup

Variants from €3.40*

€3.80*

Oil cup

Variants from €3.40*

€4.30*

Glass oiler acrylic glass

These glass oilers for model making are made from brass. The sight glass is made of impact-resistant acrylic glass. Both sizes have a connection thread with an M3 meter standard thread. The glass oilers have a fixed flow rate. The flow hole is 1.0mm. The oilers are designed as cup oilers and do not have a top lid. The real glass oilers can be installed on cylinders of flame eaters and Assemble Stirling engines. Of course, the glass oilers also look very good on eccentrics, bearing blocks of steam engines or internal combustion engines. The oilers are available in 2 different sizes. Dimensions of glass oiler 6mm cannot be adjusted Total height: 20.5mm Diameter glass: 5mm Largest diameter: 6mm Connection thread: M3 Dimensions of glass oiler 8mm cannot be adjusted Total height: 27mm Diameter glass: 7mm Largest diameter: 8mm Connection thread: M3

Variants from €6.90*

€8.00*

Spannsätze für den Modellbau zum befestigen von Schwungrädern

Clamping sets for 10mm shaft

We manufacture these clamping sets entirely from brass. The DIN 912 screws used are made of stainless steel. We use the clamping sets to attach flywheels to the drive shaft. However, there are a wide variety of possible applications for these clamping bushes in model making. The shaft does not need to be processed, it should just be free of grease. The component to be clamped, for example a flywheel, must have a recess of 14mm in diameter and at least 8mm deep. This clamping bush fits the kits “The Big Nick”, “Karl” andFlame Eater “Lutz”.Technical data clamping sets for 10mm shaft Shaft diameter: 10mm For clamping: 14mm Clamping length: 8mm Total length assembled: 16mm Largest diameter: 20mm Scope of delivery: 1 piece of clamping bush with 4 DIN 912 screws

€25.90*