Worldwide shipping
Shipping with DHL
05722/892102
info@bengs-modellbau.de

Power Coat 4 PRO powder coating system

Product information "Power Coat 4 PRO powder coating system"

The Power Coat 4 PRO is a high-quality powder coating system for small to large areas. You will receive the powder coating gun in a high-quality plastic case in which everything has its place. This powder gun is significantly more robust than our standard powder coating system. This makes it suitable for use in commercial businesses and for ambitious DIY enthusiasts.

Advantages of powder coating over painting:

  • Ready to use immediately without drying time
  • Extremely robust and abrasion-resistant
  • Optimal corrosion protection
  • Environmentally friendly as no solvents
  • Absolutely uniform surface quality
  • Coating remains elastic e.g. for springs

The Power Coat 4 PRO has a 500 ml powder container so that even larger areas can be coated with powder without having to refill the coating powder in the meantime. Another advantage of this device is that there is a water separator and a pressure regulator directly on the powder gun. This makes setting the correct pressure much easier.

Scope of delivery:

  • Powder coating device with Schuko earthing plug, stable ground clamp, water separator and pressure regulator
  • Two 500ml powder containers to screw into the coating gun
  • Funnel for easy filling of the powder containers
  • Sturdy case for storage
  • 14 pages German operating instructions

The Power Coat 4 PRO powder coating device is suitable for many different powder coating applications. With this powder coating system, even the smallest components can be easily powder coated. Even larger parts are no problem thanks to the 500 ml powder container. Our powder coating systems are very often used in the restoration of old motorcycles or cars. With this system it is possible to coat entire motorcycle frames or rims with powder varnish for coating. The result is indistinguishable from industrial powder coating. Powder coating is also very often used in technical model making because the finished surface is extremely robust, scratch-resistant and provides good corrosion protection.

Application examples

  • powder coating of vintage car parts
  • Powder coat motorcycle parts
  • Powder coat rims
  • Powder coating of small parts in technical model making

This powder gun is a Tribo powder coating system. The powder becomes statically charged in the barrel of the gun due to the friction on various materials. The device is connected to the earth conductor of the socket via a ground terminal and a Schuko plug, which means the component is grounded. Due to the electrostatic charge generated during the run, the coating powder adheres to the workpiece. This effect allows you to coat a variety of materials. The charging occurs when the powder particles touch the wall of the barrel of the powder gun, causing electrons to be released from the Teflon™ barrel. The powder paint particles are separated from the spray gun faster than the charge can be redistributed. This means that the powder particles remain charged and stick to any material. You do not need any additional electricity for the tribo process. The included plug is only the ground connection of the device.

Power Coat 4 PRO can process all coating powders that are suitable for Tribo systems.

Here in our online shop you will find suitable spare parts for the powder coating system. p>

Coating wood, tiles and glass

In contrast to conventional powder coating systems, this powder gun coating system can also be used to coat wood, tiles and glass. Since these materials are not conductive, the ground terminal cannot be connected here. This makes applying the powder a little more difficult. You should first make a sample to test the properties of the material and its behavior during powder coating.

What else is needed (not included)

  • Compressor
  • Extension hose
  • oven for burning (min. 200c ° from a small household oven to our)  

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Replacement powder containers
These replacement powder containers are suitable both as a powder container for the powder coating device and for storing unneeded powder. The replacement powder containers come with a screw cap so you can store the powder in a dry place. With a replacement powder container, changing the color when powder coating with the Power Coat 4 PRO is much quicker. The replacement powder containers are made from break-resistant plastic. The standard size of the replacement powder containers can hold 0.5L of powder. This makes them suitable for most powder coating applications. Replacement powder container powder gun for Power Coat 4 PRO Contents 0.5l Height 16cm Diameter 7.5cm

€7.30*
Powder coating powders
You will get powder coating powder in facade quality in 250g bottles. The coating powder is filled into plastic bottles so that the powder remains permanently dry. With the powder you can create an easy to clean, weather and UV-resistant and extremely durable surface coating. The powder is suitable both for powder coating with corona and with tribo coating devices. The coating powder has excellent light and weather resistance. It also has a good elasticity so you can even coat feathers. The powder adheres to all surfaces. All powder coatings available at our company are suitable for corona powder coating systems as well as for tribo powder coating systems.  The following coating powder colors are available: RAL 1003 Signal Yellow Glossy (250g) RAL 3000 Fire Red Glossy (250g) RAL 5005 Signal Blue Shining (250g) RAL 6020 Chromium oxide green Glossy (250g) RAL 7001 Silbergrau Shining (250g) RAL 7016 Antrazite Gray Glossy (250g) RAL 9005 Deep black Glossy (250g) RAL 9005 Deep black Deep matt (250g) RAL 9010 Pure White Glossy (250g) Transparent colorless high gloss (250g) Chrome Metallic Gloss (250g)  

€20.10*
high-temperature adhesive tape
The high-temperature adhesive tape made of polyester is suitable for masking components that are to be powder coated. The adhesive tape is temperature resistant up to 200 ° C. With the high-temperature adhesive tape, you can cover the areas which are not to be powder coated. On a roll are 66 m of adhesive tape. We have the tape available in different widths. High temperature adhesive tape 3,2mm wide 66m long High temperature adhesive tape 7mm wide 66m long High temperature adhesive tape 10mm wide 66m long High temperature adhesive tape 20mm wide 66m long

€9.00*
Powder coating powders
You will get powder coating powder in facade quality in 250g bottles. The coating powder is filled into plastic bottles so that the powder remains permanently dry. With the powder you can create an easy to clean, weather and UV-resistant and extremely durable surface coating. The powder is suitable both for powder coating with corona and with tribo coating devices. The coating powder has excellent light and weather resistance. It also has a good elasticity so you can even coat feathers. The powder adheres to all surfaces. All powder coatings available at our company are suitable for corona powder coating systems as well as for tribo powder coating systems.  The following coating powder colors are available: RAL 1003 Signal Yellow Glossy (250g) RAL 3000 Fire Red Glossy (250g) RAL 5005 Signal Blue Shining (250g) RAL 6020 Chromium oxide green Glossy (250g) RAL 7001 Silbergrau Shining (250g) RAL 7016 Antrazite Gray Glossy (250g) RAL 9005 Deep black Glossy (250g) RAL 9005 Deep black Deep matt (250g) RAL 9010 Pure White Glossy (250g) Transparent colorless high gloss (250g) Chrome Metallic Gloss (250g)  

€20.10*