Connecting sleeves for soldering into the steam boiler with two different fine threads. The soldering connection sleeves are inserted into a hole with a 10 mm diameter and can then be soldered hard or soft. The beeches are made of brass MS58. Thanks to the soldering connection sleeves, the parts attached to the steam boiler have a sufficiently stable and long screw-in thread.
Connecting sleeves for soldering into the steam boiler with two different fine threads. The soldering connection sleeves are inserted into a hole with a 10 mm diameter and can then be soldered hard or soft. The beeches are made of brass MS58. Thanks to the soldering connection sleeves, the parts attached to the steam boiler have a sufficiently stable and long screw-in thread.
The solder connection sleeve M6x0.75 fits our boiler accessories.The solder connection sleeve e M8x0.75 fits our safety valve with weight
The socket dimensions are always the same:
Soldering diameter: 10mm
Bundle diameter: 12mm
Height: 10mm
With this screw-in connection you can easily create an easily detachable connection between steam pipes and water pipes. One side of this screw connection has a metric fine thread that you can screw into a boiler, steam engine or condenser. The other side of the screw-in connection is provided with a union nut and a cone solder nipple. Either a brass tube or a copper pipe can be soldered in and then screwed to the screw body using the union nut. The screw-in fitting is available for 3mm, 4mm, 5mm or 6mm pipe. The screw-in connection is made entirely of brass and seals with a cone. You can also find in our shopSolder connection sleeve into which the screw-in connections can be screwed in.
Matching Soldering nipple and Coupling nuts you can also find spare parts in our online shop.
Dimensions of screw-in connection for 3mm pipe:
Length with nipple: 19mm
Wrench size: 7mm
Length without nipple: 15mm
Screw-in thread: M5x0.5
Dimensions of screw-in connection for 4mm pipe:
Length with nipple: 22mm
Wrench size: 8mm
Length without nipple: 15mm
Screw thread: M6x0.75
Dimensions of screw-in connection for 5mm pipe:
Length with nipple: 24mm
Wrench size: 9mm
Length without nipple: 15mm
Screw thread: M6x0.75
Dimensions of screw-in connection for 6mm pipe:
Length with nipple: 28mm
Wrench size: 10mm
Length without nipple: 20mm
Screw-in thread: M8x0.75
We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results.
The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder
If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder.
Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long.
1mm or 1.5mm diameter
Silver solder bars L-Ag55 (55% silver)
Working temperature 630 ° C
Bengs Modellbau has used this silver solder bars for years.
The soft copper tube is suitable for all applications in steam model making and for technical model making. The Cu pipe is also suitable for gasoline lines or diesel lines for motorcycles, tractors and vintage cars. The copper tube is very malleable and can be easily bent into narrow radii by hand. Our soft copper pipes are delivered in a ring and are 1000mm long. If you need a 3m long copper pipe in one piece, simply order 3m copper pipe in the desired diameter. In order to keep your waste as low as possible, we always deliver the pipes in one piece in the length you ordered. Matching compression fittings can also be found in our shop.
If you order several meters of a CU pipe diameter, we will always send you the copper pipe in one piece.
The following CU tubes and copper tubes in a ring are available:
3mm x 0.5mm soft copper tube
4mm x 0.5mm soft copper tube
5mm x 0.5mm soft copper tube
6mm x 0.5mm soft copper tube
6mm x 1.0mm soft copper tube
8mm x 1.0mm soft copper tube
10mm x 1.0mm soft copper tube
Variants from €8.80*
€9.70*
This website uses cookies to ensure the best experience possible. More information...