Worldwide shipping
Shipping with DHL
05722/892102
info@bengs-modellbau.de

Super-Star Schleifstern Ø 80 mm

Product information "Super-Star Schleifstern Ø 80 mm"
Dieses flexibles Schleif- und Entgratwerkzeug wird hergestellt aus einem flexiblen stabilem Schleifgewebe. Der Super-Star Schleifstern Ø 80 mm ist perfekt geeignet für das Schleifen von Profilen und Reliefs in Holz sowie zum Entgraten und Entrosten von Metallteilen aller Art. Der Super-Star Schleifstern kann sowohl mit einer Handbohrmaschine/Akkuschrauber als auch mit einer Standbohrmaschine verwendet werden. Dank seiner Weichheit im Vergleich zu einer Drahtbürste kann der Schleifstern problemlos in Ecken und Sicken gelangen. Trotz seiner Flexibilität ist dieses Schleifwerkzeug äußerst haltbar.

  • Außen-Durchmesser: 80mm -Gesamtlänge: 100mm 
  • Nutzbare Breite: 25-30mm, je nach Korngröße 
  • Erhältlich in den Körnungen grob (#80) mittel (#120) - fein (#240)  
  • Max. Drehzahl: 3.000 1/min 
  • Aufnahmeschaft: 6mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Super-Star Schleifstern Ø 80 mm
Dieses flexibles Schleif- und Entgratwerkzeug wird hergestellt aus einem flexiblen stabilem Schleifgewebe. Der Super-Star Schleifstern Ø 80 mm ist perfekt geeignet für das Schleifen von Profilen und Reliefs in Holz sowie zum Entgraten und Entrosten von Metallteilen aller Art. Der Super-Star Schleifstern kann sowohl mit einer Handbohrmaschine/Akkuschrauber als auch mit einer Standbohrmaschine verwendet werden. Dank seiner Weichheit im Vergleich zu einer Drahtbürste kann der Schleifstern problemlos in Ecken und Sicken gelangen. Trotz seiner Flexibilität ist dieses Schleifwerkzeug äußerst haltbar.Außen-Durchmesser: 80mm -Gesamtlänge: 100mm Nutzbare Breite: 25-30mm, je nach Korngröße Erhältlich in den Körnungen grob (#80) mittel (#120) - fein (#240)  Max. Drehzahl: 3.000 1/min Aufnahmeschaft: 6mm

€14.90*
Blow torch material kit
With this material kit you can make a blowtorch yourself. The blowtorch is model size and has a total height of 125 mm. The blowtorch is mostly made of brass. The handle and the handwheel for adjusting the flame size are made from the included oak wood. The finished blowtorch also works in the model just like an original blowtorch. You can use the torch for brazing, soft soldering, paint stripping and for operating glow tube igniter engines. Of course, this beautiful blowtorch is also suitable for the model making display case just to look at. A blowtorch is a gas burner that was originally powered by gasoline or spirit. The blowtorch is not only used for soldering but also as a heating lamp for preheating glow-head engines. An alcohol-powered blowtorch does not start by itself but must be preheated. Due to the complicated handling, spirit and gasoline-powered blowtorches were replaced in the 1970s by blowtorches with butane as a fuel. The alcohol-powered blowtorch remains a fascinating tool to this day.  All milled parts and all stamped parts (tank base and tank cap) are included in the kit ready-made. All turned parts are included in the delivery as raw material. Of course, as with all other Bengs model building material kits, you will also receive all the necessary sealing elements, screws and fiberglass wicks. A 0.38 mm drill is required to build this kit. The drill is also included in the kit. Scope of delivery blowtorch material kit Finished milled parts Finished embossed base and lid for the tank Raw material for the turned parts All required screws, seals and grub screws Construction plan blowtorch drawings (3 sheets) and construction instructions (1 sheet) 1x drill 0.38mm  Dimensions of blowtorch material kit Height: 125mm Length overall: 135mm Diameter tank: 50mm Fuel: spirit (not included) Here you can access a detailed Blowtorch construction report in our magazine.

€57.70*
Freewheel bearing 10mm/14mm
Freewheel bearing / needle bearing HF1012 with an inner diameter of 10 mm, an outer diameter of 14 mm and a bearing height of 12 mm. A freewheel bearing only transmits the force in one direction of rotation, in the other direction of rotation, the bearing runs freely and it there is no power transmission.  We use these freewheel bearings to start our combustion engines. You build a holder for the cordless screwdriver and press the freewheel into the holder (note the direction of rotation).With the device you can bring the combustion engine to the speed of the cordless screwdriver when the engine starts and the As the speed increases, the freewheel slips over and the cordless screwdriver is protected.  The freewheel bearing has the following dimensions  inner diameter 10 mm outer diameter 14 mm Width 12 mm Weight 0.004 kg  Outer ring with knurling in the outer ring

€4.00*
Twist drills, profile ground drills HSS
You will find profile-ground drills made of HSS steel here. These twist drills have a metallic silver color, which is caused by the fact that the drills are not just rolled like the black roll-rolled drills, but are instead carefully milled and ground from solid material. In industry and trade, only profile-ground drills made of HSS steel are used. Profile-ground twist drills are slightly more expensive to produce and are far superior to black roll-rolled drills in terms of precision and service life. The cross cutting edge of the twist drills we offer is ground and the tip grinding contributes a lot to good drilling performance. The Hss twist drills can be used in column drills, hand drills, cordless drills, lathes and milling machines. These drills are of industrial quality and are not hardware store goods! Twist drill sets with metal cassette can be found here. Profile-ground drill bits made of HSS steel Price per piece. Please select the desired size above.

€1.40*