Free shipping from 150€
Shipping with DHL
05722/892102
info@bengs-modellbau.de
Go to homepage
Shopping cart €0.00*

Taps DIN 371

Bengs Modellbau
Durchgangslochgewindebohrer mit gerader Spanführung zur Spanabfuhr nach unten
Grundlochgewindebohrer mit Rechtdrall zur Spanausfuhr nach oben
Gewindebohrer nach DIN 371 mit Vierkant zum Handgewindeschneiden
Durchgangslochgewindebohrer mit gerader Spanführung zur Spanabfuhr nach unten
Grundlochgewindebohrer mit Rechtdrall zur Spanausfuhr nach oben
Gewindebohrer nach DIN 371 mit Vierkant zum Handgewindeschneiden

€11.10*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Taps
Thread
Product number: 3026
Product information "Taps DIN 371"

Thanks to their square grinding, our machine thread drills are also suitable as hand-held tap drills. You have the choice between through-hole tap drills (blind hole drills) and basic drill tap drills. The through-hole tap is suitable for through holes where the chips can fall out. Taps for through holes have a longer cut but are more stable than basic hole drill.

The ground hole drills are ground with a right-hand twist, which causes the chips to be ejected upwards, which is of course an advantage for ground holes. They have a very short cut to cut the thread as far as possible into the bore and to create a thread that is as long as possible. However, it should be noted that the stiffness of the taps is significantly lower in the case of the sizes M2 and M2.5. The taps are made of HSS steel and are suitable for threading in steel, brass, plastics, copper, cast steel, aluminum and stainless steel. If you always use sufficient cutting oil during the thread cutting, the service life of the taps is considerably increased.

Particularly when cutting small threads in model construction such as M2, M2,5 or M3, we recommend our round winder. This allows a safe and accurate cutting of threads with a clearly reduced risk that the tapping tool breaks.

If you want to drill a core hole but do not have a table book or a thread table, this is no problem. There is a simple rule of thumb for metric control threads. Just take the diameter of the tapping tap times 0.8. Example M5 = 5mm diameter x 0.8 = 4mm core hole drill.

Machine thread tap HSS

  • With square cut (can also be used as a hand-held drill)
  • right hand cutting
  • industrial quality

You can choose between two different thread-cutting variants, namely through-hole tap and basic drill tap.

The following taps are always available:

  • Gewindebohrer Durchgangsloch M2
  • Gewindebohrer Durchgangsloch M2,5
  • Gewindebohrer Durchgangsloch M3
  • Gewindebohrer Durchgangsloch M4
  • Gewindebohrer Durchgangsloch M5
  • Gewindebohrer Durchgangsloch M6
  • Gewindebohrer Durchgangsloch M8 
  • Gewindebohrer Grundloch M2
  • Gewindebohrer Grundloch M2,5
  • Gewindebohrer Grundloch M3
  • Gewindebohrer Grundloch M4
  • Gewindebohrer Grundloch M5
  • Gewindebohrer Grundloch M6
  • Gewindebohrer Grundloch M8

 

Gewindebohrer-DIN-371

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Cutsomers also bought

Gewindebohrer nach DIN 371 mit Vierkant zum Handgewindeschneiden
Taps DIN 371
Thanks to their square grinding, our machine thread drills are also suitable as hand-held tap drills. You have the choice between through-hole tap drills (blind hole drills) and basic drill tap drills. The through-hole tap is suitable for through holes where the chips can fall out. Taps for through holes have a longer cut but are more stable than basic hole drill. The ground hole drills are ground with a right-hand twist, which causes the chips to be ejected upwards, which is of course an advantage for ground holes. They have a very short cut to cut the thread as far as possible into the bore and to create a thread that is as long as possible. However, it should be noted that the stiffness of the taps is significantly lower in the case of the sizes M2 and M2.5. The taps are made of HSS steel and are suitable for threading in steel, brass, plastics, copper, cast steel, aluminum and stainless steel. If you always use sufficient cutting oil during the thread cutting, the service life of the taps is considerably increased. Particularly when cutting small threads in model construction such as M2, M2,5 or M3, we recommend our round winder. This allows a safe and accurate cutting of threads with a clearly reduced risk that the tapping tool breaks. If you want to drill a core hole but do not have a table book or a thread table, this is no problem. There is a simple rule of thumb for metric control threads. Just take the diameter of the tapping tap times 0.8. Example M5 = 5mm diameter x 0.8 = 4mm core hole drill. Machine thread tap HSS With square cut (can also be used as a hand-held drill) right hand cutting industrial quality You can choose between two different thread-cutting variants, namely through-hole tap and basic drill tap. The following taps are always available: Gewindebohrer Durchgangsloch M2 Gewindebohrer Durchgangsloch M2,5 Gewindebohrer Durchgangsloch M3 Gewindebohrer Durchgangsloch M4 Gewindebohrer Durchgangsloch M5 Gewindebohrer Durchgangsloch M6 Gewindebohrer Durchgangsloch M8  Gewindebohrer Grundloch M2 Gewindebohrer Grundloch M2,5 Gewindebohrer Grundloch M3 Gewindebohrer Grundloch M4 Gewindebohrer Grundloch M5 Gewindebohrer Grundloch M6 Gewindebohrer Grundloch M8  

Variants from €11.00*
€11.10*
Schneideisen nach DIN 223 zum Herstellen von Außengewinden im Modellbau
cutting dies
DIN 223 cutting dies for the finished, teach-based metric ISO control thread according to DIN 13. The cutting edges have a closed pre-slit form. They can either be clamped in a cutting-edge holder or in the cutting-edge holder for the Bengs model-making machine. The cutting units are made of HSS steel (high-speed working steel). They are suitable for machining brass, copper, steel, stainless steel, silver steel, plastics and cast iron. Lubrication of the cutting tool with cutting oil is absolutely recommended. It increases the service life (life) of the cutting tool and reduces the effort required to make the thread. Industiequalität High cutting performance Tolerance field 6g DIN 223B = EN 22568 The following tapping tools are always available:  M2 Schneideisen Hss / M2 / 16mm x 5mm  M2,5 Schneideisen Hss / M2,5 / 16mm x 5mm  M3 Schneideisen Hss / M3 / 20mm x 5mm  M4 Schneideisen Hss / M4 / 20mm x 5mm  M5 Schneideisen Hss / M5 / 20mm x 7mm  M6 Schneideisen Hss / M6 / 20mm x 7mm  M8 Schneideisen Hss / M8 / 25mm x 9mm  M10 Schneideisen Hss / M10 / 30mm x 11mm

Variants from €9.90*
€10.60*
Gewindebohrer nach DIN 371 mit Vierkant zum Handgewindeschneiden
Taps DIN 371
Thanks to their square grinding, our machine thread drills are also suitable as hand-held tap drills. You have the choice between through-hole tap drills (blind hole drills) and basic drill tap drills. The through-hole tap is suitable for through holes where the chips can fall out. Taps for through holes have a longer cut but are more stable than basic hole drill. The ground hole drills are ground with a right-hand twist, which causes the chips to be ejected upwards, which is of course an advantage for ground holes. They have a very short cut to cut the thread as far as possible into the bore and to create a thread that is as long as possible. However, it should be noted that the stiffness of the taps is significantly lower in the case of the sizes M2 and M2.5. The taps are made of HSS steel and are suitable for threading in steel, brass, plastics, copper, cast steel, aluminum and stainless steel. If you always use sufficient cutting oil during the thread cutting, the service life of the taps is considerably increased. Particularly when cutting small threads in model construction such as M2, M2,5 or M3, we recommend our round winder. This allows a safe and accurate cutting of threads with a clearly reduced risk that the tapping tool breaks. If you want to drill a core hole but do not have a table book or a thread table, this is no problem. There is a simple rule of thumb for metric control threads. Just take the diameter of the tapping tap times 0.8. Example M5 = 5mm diameter x 0.8 = 4mm core hole drill. Machine thread tap HSS With square cut (can also be used as a hand-held drill) right hand cutting industrial quality You can choose between two different thread-cutting variants, namely through-hole tap and basic drill tap. The following taps are always available: Gewindebohrer Durchgangsloch M2 Gewindebohrer Durchgangsloch M2,5 Gewindebohrer Durchgangsloch M3 Gewindebohrer Durchgangsloch M4 Gewindebohrer Durchgangsloch M5 Gewindebohrer Durchgangsloch M6 Gewindebohrer Durchgangsloch M8  Gewindebohrer Grundloch M2 Gewindebohrer Grundloch M2,5 Gewindebohrer Grundloch M3 Gewindebohrer Grundloch M4 Gewindebohrer Grundloch M5 Gewindebohrer Grundloch M6 Gewindebohrer Grundloch M8  

€11.00*
Gewindebohrer nach DIN 371 mit Vierkant zum Handgewindeschneiden
Taps DIN 371
Thanks to their square grinding, our machine thread drills are also suitable as hand-held tap drills. You have the choice between through-hole tap drills (blind hole drills) and basic drill tap drills. The through-hole tap is suitable for through holes where the chips can fall out. Taps for through holes have a longer cut but are more stable than basic hole drill. The ground hole drills are ground with a right-hand twist, which causes the chips to be ejected upwards, which is of course an advantage for ground holes. They have a very short cut to cut the thread as far as possible into the bore and to create a thread that is as long as possible. However, it should be noted that the stiffness of the taps is significantly lower in the case of the sizes M2 and M2.5. The taps are made of HSS steel and are suitable for threading in steel, brass, plastics, copper, cast steel, aluminum and stainless steel. If you always use sufficient cutting oil during the thread cutting, the service life of the taps is considerably increased. Particularly when cutting small threads in model construction such as M2, M2,5 or M3, we recommend our round winder. This allows a safe and accurate cutting of threads with a clearly reduced risk that the tapping tool breaks. If you want to drill a core hole but do not have a table book or a thread table, this is no problem. There is a simple rule of thumb for metric control threads. Just take the diameter of the tapping tap times 0.8. Example M5 = 5mm diameter x 0.8 = 4mm core hole drill. Machine thread tap HSS With square cut (can also be used as a hand-held drill) right hand cutting industrial quality You can choose between two different thread-cutting variants, namely through-hole tap and basic drill tap. The following taps are always available: Gewindebohrer Durchgangsloch M2 Gewindebohrer Durchgangsloch M2,5 Gewindebohrer Durchgangsloch M3 Gewindebohrer Durchgangsloch M4 Gewindebohrer Durchgangsloch M5 Gewindebohrer Durchgangsloch M6 Gewindebohrer Durchgangsloch M8  Gewindebohrer Grundloch M2 Gewindebohrer Grundloch M2,5 Gewindebohrer Grundloch M3 Gewindebohrer Grundloch M4 Gewindebohrer Grundloch M5 Gewindebohrer Grundloch M6 Gewindebohrer Grundloch M8  

Variants from €11.00*
€12.40*
This website uses cookies to ensure the best experience possible. More information...