Wrenches
Product number:
3075
Product information "Wrenches "
We provide you with combination wrenches with particularly small wrench sizes specifically for technical model making. The combination wrenches are made of chrome vanadium steel and are therefore extremely hard and suitable for even the toughest use. The combination wrenches are of industrial quality.
Combine wrenches made of chrome-vanadium steel, chrome-plated
- Wrench size 3mm
- Wrench size 4mm
- Wrench size 5.5mm
- Wrench size 7mm
Login
Cutsomers also bought
Wrenches
€11.90*
We provide you with combination wrenches with particularly small wrench sizes specifically for technical model making. The combination wrenches are made of chrome vanadium steel and are therefore extremely hard and suitable for even the toughest use. The combination wrenches are of industrial quality.Combine wrenches made of chrome-vanadium steel, chrome-plated
Wrench size 3mm
Wrench size 4mm
Wrench size 5.5mm
Wrench size 7mm
Variants from €8.20*
High temperature soft solder
€2.40*
High temperature soft solder with a melting point of 250 ° C is suitable for fittings, pipelines and components on steam engines, Stirling engines and flame eaters. The soft solder is filled with a flux that burns without residue when flame brazing (flux residues must be removed in the case of piston soldering !!!). If you need additional flux, you can use normal soft solder flux. Due to the increased melting point of 250 °, it is a good alternative to brazing. However, the high-temperature softening braze can not replace brazing. This product should not be used in the vicinity of the boiler. The use of silver solder is recommended.
Wire diameter: 1mm
Wire length: 1000mm
This product is unleashed !!!
brass round Ms58
€3.20*
Brass Ms58 is a very good machinable material. Another advantage of brass is that it is rust-free. It is suitable for turning, milling, drilling and tapping. In addition, it can be well brazed with silver brazing and soldering. These characteristics are very much in line with the technical model builder. Most steam engines, Stirling engines and flame eaters in model making are largely made of MS58 brass. We offer you here in the Bengs Modellbau Shop brass round material in the diameter from 1mm to 50mm.
Features of brass Ms58 round
Round Material Brass Quality: Ms 58 (drilling and turning quality)
Strength F45-50
You always get 300mm long brass Ms58 round sections.
Saving set thin brass Ms 58 / You save 20%
Brass round material 300mm per 1 rod
4mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
Saving set thick brass Ms 58 / you save 20%
Brass round material 300mm per 1 rod
18mm
20mm
22mm
30mm
Variants from €3.10*
Abrasive Nylon Cup Brush 130mm
€7.80*
This Abrasive Nylon Cup Brush 130mm is perfect for deburring, smoothing, edging and fine sanding of small to large parts. The Cup Brush consists of a blue plate in which nylon threads are passed through the silicon carbide. The brush has an M14 connection thread and therefore fits all common angle grinders. Optionally, you can also order an M14 -10mm adapter with which you can clamp the Cup Brush into your stand boring machine. You will find the adapter at the top of the selection selection. Into the stator boring machine, you have a fantastic deburring tool with an extremely long service life. The nylon threads always have an even grinding effect since new abrasives are constantly released by the wear of the nylon thread. With the Osborn Cup Brush you can process steel, stainless steel, brass, copper, bronze and also aluminum.
Dimensions of Abrasive Nylon Cup Brush 130mm:
Diameter of grinding plate: 130 mm
Grain size: K120
Connection thread: M14 (shaft angle grinder)
Bristle length: 30 mm
Technical characteristics of the Abrasive Nylon Cup Brush 130mm
Nylon filaments interspersed with silicon carbide
Uniform grinding effect (new abrasive material is constantly released by wear)
High elasticity and flexibility without risk of breakage
No clogging of the resting surface with working residues
Resistant to weak acids and alkalis
Very long service Made in Germany
life with optimal conditions
Application areas of the Abrasive Nylon Cup Brush 130mm
Lacquering and structuring of wood
Suitable for steel, stainless steel, brass, copper, bronze and aluminum
Rusting or descaling of metal surfaces
For deburring, smoothing, and fine grinding from small to large components
Break and crimp edges
Aluminum profiles
Deburring with the Osborn dish brush 130mm