spark plugs CM-6 M10x1

Kleine Zündkerze mit M10x1 Gewinde für den Verbrennungsmodellbau

€9.50*

Available, delivery time: 1-3 days

Product number: 1500

Product information "spark plugs CM-6 M10x1"

These relatively small spark plugs are particularly suitable for model combustion engines. Its metric M10 × 1 thread also fits into smaller cylinder heads. The spark plugs fit into our internal combustion engine and can be used as a spare part. Of course, you can also use the spark plug CM-6 for your own development with our ignition components.

Data of spark plug CM-6 M10x1

Key range: 14.0 mm
Overall length: 36mm
External thread: M10x1
Thread length: 8.6 mm

Zuendkerze-CM-6-ngk-m10x1

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Sehr zuverlässiger Kondensator für Unterbrecherzündungen im Modellbau

Ignition condenser

The Ignition condenser for intermittent ignition is a component which should not be missing. The condenser regulates the strength of the ignition spark. This ignition coil is also installed in the internal combustion engine Karl and can be used as a spare part. You can use this capacitor to create an ignition breaker for model building. This is a solid moped technology that has proven itself over many years. An intermittent ignition is very durable and also times a wrong polung. Dimensions Capacitor for Ignition condenser Length: 41mm Diameter: 18mm Threaded connection: M4

€4.80*

Zünspule 12V für Unterbrecherzündungen im Modellbau

Ignition coil 12V intermittent ignition

This ignition coil is suitable for installation in an intermittent ignition. This ignition coil is also installed in the internal combustion engine Karl and can be used as a spare part. In the normal case, this coil is used for ignition in mopeds. However, due to its reliability and performance, it is very well suited for model construction. An intermittent ignition usually works very reliably and can be more easily checked for faults than an electric ignition. Dimensions of ignition coil 12V intermittent ignition Length: 123mm Diameter rear: 40 mm Largest diameter collar: 48 mm Connection thread: 2x M4

€24.60*

Ein zuverlässiger Unterbrecher für Zündungen im Modellbau

Ignition interrupter

Use this Ignition interrupter to generate the spark. You can control the breaker directly via a cam or via a ram. This article is a serial product from the moped technology. This guarantees a good quality, long durability and fast availability. You can create your own ignition system from this interrupter. We also use this breaker in the ignition of our internal combustion engine "Karl". It can also be used as a spare part in this model. Dimensions of the Ignition interrupter Length: 30mm Width: 30mm Height: 20mm

€5.40*

Zylinderrohr als Zylinderhülse in Modellbaumotoren mit hoher Verschleißfestigkeit

Cylinder tube

This tube is a hydraulic cylinder tube. The inside of the tube is very dimensionally stable and wear-resistant. The cylinder tube is suitable as a cylinder sleeve for an internal combustion engine or flame eater. We also use this cylinder tube in our models. We use it for the combustion engine Karl, Stirling engine "Big Laura" and the Flame Eater Jarne. Due to its high wear resistance, the tube has proven itself as a cylinder sleeve for us. Dimensions of hydraulic cylinder tube 25mm: Outer diameter: 35mm Inner diameter: 25mm Length: 83mm Material: St52 Suitable Piston ringsfor this cylinder tube can be found here Dimensions of hydraulic cylinder tube 30mm: Outer diameter: 40mm Inner diameter: 30mm Length: 86mm Material: St52 Dimensions of hydraulic cylinder tube 40mm: Outer diameter: 50mm Inner diameter: 40mm Length: 117mm Material: St52 Dimensions of hydraulic cylinder tube 50mm: Outer diameter: 60mm Inner diameter: 50mm Length: 142mm Material: St52

€14.10*