Brass Ms58 flat material

€3.60*

Available, delivery time: 1-3 days

Product number: 52126

Product information "Brass Ms58 flat material"

Brass Ms58 flat material is a very good machinable material. Brass is probably the most widely used material in technical modeling. Which is certainly due to the fact that it can be worked very well. It can be milled, turned, drilled, brazed and softened. Many Stirling engines, steam engines and flame eaters in technical model construction are mainly made of MS58 brass. You can order brass flat material in different thicknesses from 2mm to 6mm here at the Bengs Modellbau Shop.

Flat Material Brass Quality: Ms 58 (drilling and turning quality)
Strength F45-50
Flat material 50mm wide
Length 300mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Schmirgelfeilen in verschiedenen Durchmessern

Sanding paper file

The flat emery file with a wooden handle is available in different grit sizes. The cleanly cut wooden strips are covered with sandpaper. The files are ideal for working on wood or metal. We also like to use the emery files in our workshop. Dimensions of the emery files: Length: 250 mm Working length: 210 mm Width: 20 mm Height: 6 mm Grain: K100, K220, K320, K600

Variants from €1.70*

€1.80*

Soldering wire for soft soldering stainless steel

Special soldering wire for soft soldering stainless steel and steel but also non-ferrous metals such as brass and copper. Very easy to use and all metals mentioned can be combined with each other. The flux contained in the wire is characterized by high temperature resistance. Optimum wetting on a wide variety of stainless steel makes this lead-free soft solder wire a top product. The use of additional flux is usually not necessary. The soft solder remains shiny even after long-term use of the soldered workpieces and has a very good color match to stainless steel. Processing instructions for soft soldering stainless steel Heat the components to be connected with the soldering torch to approx. 250°C and feed the wire. The flux flows out of the wire and spreads to the soldering point. The solder melts and wets the material where the flux could previously work. Then let the component cool down and remove any flux residue with water. Only suitable for 1.4301, 1.4305 or similarly alloyed stainless steels. Not suitable for higher alloyed (V4A) stainless steel qualities. Technical information soft solder for stainless steel Melting range: 221 °C Working temperature: 280C° - 350C° max. Continuous operating temperature: 100°C Low temperature resistance: - 200°C suitable for soldering in the field of food technology Lead-free Wire diameter: 1.5mm Wire length: 1000mm Suitable for soldering the following base materials Stainless steel (1.4301, 1.4305) Copper Brass Bronze Steel Carbide metals and connections of the materials mentioned with one another

Content: 10.5 Gramm (€73.33* / 100 Gramm)

€7.70*

High temperature soft solder

High temperature soft solder with a melting point of 250 ° C is suitable for fittings, pipelines and components on steam engines, Stirling engines and flame eaters. The soft solder is filled with a flux that burns without residue when flame brazing (flux residues must be removed in the case of piston soldering !!!). If you need additional flux, you can use normal soft solder flux. Due to the increased melting point of 250 °, it is a good alternative to brazing. However, the high-temperature softening braze can not replace brazing. This product should not be used in the vicinity of the boiler. The use of silver solder is recommended. Wire diameter: 1mm Wire length: 1000mm This product is unleashed !!!

€2.40*

Sanding paper file

Variants from €1.70*

€1.80*