Precision vice

Bengs Modellbau

€132.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Breite

50mm Backenbreite

60mm Backenbreite

80mm Backenbreite

Product number: 3702

Product information "Precision vice"

This precision vise impresses with its very clean workmanship and very little play in the clamping jaw. The screw is ground on all sides. The trapezoidal thread spindle runs in a bronze nut. The clamping jaw of the precision vice has horizontal and vertical prisms for clamping round workpieces. There are also threaded holes in the jaws to attach a stop if necessary. The screw base can be used on a pillar drill, but is also suitable for the milling machine.

Precision vice variants

Type 1 jaw width 50mm

Total height: 50mm
Jaw height: 25mm
Clamps max.: 65mm
Total length: 155mm
Weight: 2.05kg

Type 2 jaw width 60mm

Total height: 50mm
Jaw height: 25mm
Clamps max.: 55mm
Total length: 110mm
Weight: 1.6kg

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Feingewindeschneideisen zum Anfertigen von außenliegenden Feingewinden im Modellbau

Metric fine threads

These dies for metric fine threads are made from HSS steel. We only supply you with cutting dies and taps of industrial quality, so that you can enjoy your tools for a long time. Fine threads are well suited for use in model making because the threads look more delicate. Bengs Modellbau likes to use fine threads on tank caps, coolant caps, screw connections or adjustment spindles. You can of course also order matching die holder in the Bengs model shop. Please always use cutting oil when using fine thread dies. Industrial quality The following thread cutting dies are always available: Other sizes available at short notice upon request. Fine thread dies Die cutting iron M4x0.5 / dimensions 20mm x 5mm Die cutting iron M5x0.5 / dimensions 20mm x 5mm Die cutting iron M6x0.5 / dimensions 20mm x 7mm Die cutting iron M6x0.75 / dimensions 20mm x 7mm Die cutting iron M7x0.5 / dimensions 25mm x 9mm Die cutting iron M8x0.75 / dimensions 25mm x 9mm Die cutting iron M8x1 / dimensions 25mm x 9mm Die cutting iron M10x1 / dimensions 30mm x 11mm

Variants from €15.10*

€19.30*

Satin wheel

These satin wheel are available in fine, medium and coarse grain sizes. You can use these satin wheel to clean the surface or the material you have started. Optimum cleaning of the satin wheel also brazed components but also to remove a rust or oxide layer on small components in model building, the satin brushes are suitable. The grinding wheel are fixed on the mandrel. The wheels can easily be clamped into the chuck of a fast grinder, for example Dremel or Proxxon. We use the satin wheels to clean parts soldered with silver solder. Characteristics of Satin wheel: Diameter Satining wheel: 22mm Shank: 2.35 mm Manufacturer: Scotch

Variants from €2.70*

€2.80*

Brass remnants

Fill up your leftover box!!! With these 800g brass scraps you always have a little spare material on hand. You get 200g of Ms58 flat material between 2mm and 6mm thick and 600g Ms58 round material between 3mm and 50mm diameter. The exact composition is of course always different.

€11.90*

Gewindebohrer nach DIN 371 mit Vierkant zum Handgewindeschneiden

Taps DIN 371

Thanks to their square grinding, our machine thread drills are also suitable as hand-held tap drills. You have the choice between through-hole tap drills (blind hole drills) and basic drill tap drills. The through-hole tap is suitable for through holes where the chips can fall out. Taps for through holes have a longer cut but are more stable than basic hole drill. The ground hole drills are ground with a right-hand twist, which causes the chips to be ejected upwards, which is of course an advantage for ground holes. They have a very short cut to cut the thread as far as possible into the bore and to create a thread that is as long as possible. However, it should be noted that the stiffness of the taps is significantly lower in the case of the sizes M2 and M2.5. The taps are made of HSS steel and are suitable for threading in steel, brass, plastics, copper, cast steel, aluminum and stainless steel. If you always use sufficient cutting oil during the thread cutting, the service life of the taps is considerably increased. Particularly when cutting small threads in model construction such as M2, M2,5 or M3, we recommend our round winder. This allows a safe and accurate cutting of threads with a clearly reduced risk that the tapping tool breaks. If you want to drill a core hole but do not have a table book or a thread table, this is no problem. There is a simple rule of thumb for metric control threads. Just take the diameter of the tapping tap times 0.8. Example M5 = 5mm diameter x 0.8 = 4mm core hole drill. Machine thread tap HSS With square cut (can also be used as a hand-held drill) right hand cutting industrial quality You can choose between two different thread-cutting variants, namely through-hole tap and basic drill tap. The following taps are always available: Gewindebohrer Durchgangsloch M2 Gewindebohrer Durchgangsloch M2,5 Gewindebohrer Durchgangsloch M3 Gewindebohrer Durchgangsloch M4 Gewindebohrer Durchgangsloch M5 Gewindebohrer Durchgangsloch M6 Gewindebohrer Durchgangsloch M8 Gewindebohrer Grundloch M2 Gewindebohrer Grundloch M2,5 Gewindebohrer Grundloch M3 Gewindebohrer Grundloch M4 Gewindebohrer Grundloch M5 Gewindebohrer Grundloch M6 Gewindebohrer Grundloch M8

Variants from €11.00*

€11.10*